Samsung BD-H5900 Manuel D'utilisation page 65

` Depending on the content and the position of
the picture on your TV screen, you may see
vertical black bars on the left side, right side,
or both sides.
TV Aspect Ratio
Depending on the type of television you have,
you may want to adjust the screen size setting.
NOTES
✎
` Depending on the disc type, some aspect
ratios may not be available.
` If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
Bd Wise (Samsung TVs only)
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVDs.
NOTES
✎
` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
` If the player is connected to a device that does not
support BD Wise, you cannot use the BD Wise function.
` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
576p/480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
Resolution according to the output
mode
• Blu-ray disc/E-contents/digital Contents
playback
HDMI / connected
HDMI Mode
Output
Setup
E-contents/
Blu-ray Disc Digital
contents
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Resolution Max. Resolution
Auto
of TV input of TV input
1080p@60F
1080p@60F 1080p@60F
(Movie Frame : Off)
Movie Frame :
1080p@24F 1080p@24F
Auto (24 Fps)
1080i 1080i 1080i
720p 720p 720p
576p/480p 576p/480p 576p/480p
• dVd playback
HDMI / connected
Output
Setup
HDMI Mode
BD Wise 576i/480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
576p/480p 576p/480p
NOTES
✎
` If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message "If no pictures are shown
after selecting 'Yes', please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?" appears. If you
select Yes, the TV's screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
` If the screen stays blank after you have
changed the resolution, remove all discs, and
then press and hold the @ button on the top of
the player for more than 5 seconds. All settings
are restored to the factory default. Follow the
steps on the previous page to access each
mode and select the Display Setup that your TV
will support.
` When the factory default settings are restored,
all stored user BD data is deleted.
` The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24 Fps)
mode.
Movie frame (24 fps)
Setting the Movie Frame (24 Fps) feature to
Auto allows you to adjust the player's HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24 Fps)
feature only on a TV supporting this frame
rate. You can select Movie Frame only when
the player is in the HDMI 1080p output
resolution modes.
HdMI Colour format
Lets you set the colour space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HdMI deep Colour
Lets you output video from the HDMI OUT jack with
Deep Colour. Deep Colour provides more accurate
colour reproduction with greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
11