SUOMY SFERA Instructions Pour L'utilisation page 32

EN
COMFORT PADDING - (see pictures 8A/B)
The internal padding can be easily removed for washing or replacing.
Internal padding
The internal comfort padding is fixed to the helmet by Velcro.
Removal
Insertion
PEAK - (see pictures 9)
SFERA is supplied equipped with a removable peak.
Assembling
Removal
USE AND MAINTENANCE
Carefully lift the padding from the internal cap of the helmet and detach it from the Velcro
(pic. 8A).
Lay the internal padding against the interior profile of the helmet. Exert a slight pressure
inside on the Velcro straps to ensure the correct fitting (pic. 8B).
Make sure that it is properly positioned.
The peak is fixed on the shell through 3 points, two on the top inside of the front air
intakes and one at the center on the lower part.
Place the visor on the shell, taking care to match the three fixing points and make firm
pressure towards the helmet until full fitting of the same.
Keep the peak in the central part and make a strong force towards the outside of the
helmet until the complete release of the peak.