Specifications - Samlex Power SEC-1215UL Manuel Du Propriétaire

SECTION 7 |
NOMINAL INPUT VOLTAGE AND FREQUENCY
NO. OF CHARGING BANKS
REVERSE POLARITY ON OUTPUT SIDE
INTERNAL AC INPUT SIDE FUSE
INTERNAL AC INPUT SIDE FUSE
INTERNAL DC OUTPUT SIDE FUSE
OPERATING TEMPERATURE RANGE
NOTES: 1. DC voltages are based on battery temperature of 86° F / 26.7°C
2. Specifications are subject to change without notice

Specifications

MODEL NO.
INPUT
AC INPUT CONNECTION
OUTPUT
CHARGING CURRENT
CHARGING STAGES
CHARGING VOLTAGES
OUTPUT CONNECTIONS
MONITORING
LED DISPLAY
ANALOGUE METER
COOLING
TYPE OF COOLING
PROTECTIONS
OUTPUT SHORT CIRCUIT
INPUT OVERLOAD
OUTPUT OVERLOAD
FUSES
(120 VAC OPERATION)
(230 VAC OPERATION)
ENVIRONMENT
STORAGE TEMPERATURE
RELATIVE HUMIDITY
OPERATING CONDITIONS
COMPLIANCE
SAFETY
EMI
DIMENSIONS
L x W x H
WEIGHT
SEC-1215UL
120 VAC, 50/60 Hz (Default)
230 VAC, 50/60Hz (Internal jumper setting)
Attached Power Cord:
• 6 ft length
• 3 x 18AWG wire size
• NEMA5-15P Plug
15A
3 Stages (DIP Switch setting - Default):
• Bulk, Absorption and Float
2 Stages (DIP Switch setting):
• Bulk and Float
• 14.4 VDC
Absorption: • 14.0 VDC
• Disable
Float: 13.5 VDC
3
Tubular Hole with Set Screw
Hole Diameter: 4 mm / 0.16 in
Red LED: Output is available
Ammeter: 0 to 15A
Convection cooled (No fan)
No output voltage. Auto reset on removal of short
4A input side fuse will blow (120 VAC input)
Electronic current limit at 15A
20A output side fuse will blow
4A, 250V; Size 5mm x 20mm; Time Delay Type
Mfr.: Littelfuse 0218004 or equivalent
2A, 250V; Size 5mm x 20mm; Time Delay Type
Mfr.: Littelfuse 0218002 or equivalent
32V, 20A; Automotive Blade Type; Fast Acting
Mfr.: Littel Fuse 0287020 or equivalent
-20°C to +40°C / -4°F to +104°F
-30°C to +70°C / -22°F to +158°F
Up to 90%, non condensing
Indoor, ventilated, cool and dust free
Intertek-ETL Listed as follows:
• Conforms to ANSI/UL Standard 1564
• Certified to CAN/CSA STD. C22.2 No. 107.2
FCC Part 15(B), Class B
218 x 214 x 83 mm / 8.6 x 8.4 x 3.3 in
2.2 Kg / 4.8 lbs
SAMLEX AMERICA INC. | 19
(Default)
(DIP Switch setting)
)
(DIP Switch setting