Telefunken HappyCare HCASF-1 Mode D'emploi page 29

 Never use sharp objects to remove the deposits of the sole.
 Never hold the iron or the base unit under the tap water.
WARNING: Always let your steam iron unplugged and cool down for at least one hour
before any cleaning operation except for Anti-Calc Auto Clean! To start the cleaning
process, put your appliance close to a sink as water may come out of the tank when it is
opened. Do not use any industrial or harsh descaling products when rinsing the boiler tank
to avoid damaging the iron.
 Your cordless steam iron is equipped with the Anti-Calc Auto Clean function. To extend the
lifetime of your appliance and keep the steaming performance at its optimum level, it is
recommended to perform monthly the Anti-calc Clean Function. Follow the below step:
Step 1
Fill in your water tank with a jug,
ensure to respect the Max. level
indicator.
Step 4
Follow the instructions given in
the "Charging table"
charging the steam iron. When
the charging finishes, unplug
steam iron and remove the iron.
Step 2
Plug your steam iron into a wall
socket then set the temperature
dial to MAX.
Step 5
Hold your iron above the sink,
for set the steam control set to max.
and gently shake the iron to
flush out the scales until all
water has been used.
Step 3
Set the steam control to
Step 6
Put back the iron to its base and
set the steam control to
Let the steam iron cool down for
at least 30 min. before putting it
back in its storage.
ENGLISH
.
.
13