Ironing Tips; Cleaning And Maintenance - Telefunken HappyCare HCASF-1 Mode D'emploi

4. Turning off your steam iron
 Put the iron on the thermal insulating cushion base.
 Set
the steam control to
from the wall outlet socket. Let the steam iron cool down for at least 30 minutes, then rewind
the cable sector around the base before storing it back.
WARNING: Always let your steam generator cool down for at least one hour before putting
it back in its storage!

Ironing tips

 Always check first whether a label with ironing instructions is attached to the article. Follow these
ironing instructions in any case.
 If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
 Never iron over zip or rivet in the cloth. This will damage the soleplate. Iron around such object.
Fabrics
Synthetic
Silk
Wool
Cotton
Linen

Cleaning and maintenance

 Put the iron on the steam thermal insulating cushion base.
 Set
the steam control to
from the wall outlet socket. Let the steam iron cool down for at least 30 minutes.
 Empty the water tank of the remaining water.
 Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive (liquid)
cleaner. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the steam
station iron and the thermal insulating cushion with dry cloth.
 Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
the thermostat control to the minimal then disconnect the plug
, turn
Temperature
MIN
●
●●
●●●
MAX
the thermostat control to the minimal then disconnect the plug
, turn
Steam setting Steam boost
No
No
No
Yes
Yes
ENGLISH
Spray
No
No
Yes
Yes
Yes
12