Bigben RRVP Mode D'emploi page 16

• Press Min Set (18) to set the minute and Alarm 1(9) to confirm the Minute
• The unit switches to volume mode and press Hour (16) and Min (18) to set the volume up to
15. Press to confirm.
• To remind you that the alarm function is ON, the LED display will show the sign "1 ON" 15
seconds after the alarm has been set.
• The alarm with projection light will come on at the selected time.
• When alarm is sounding, the projection will come on automatically.
• There is a dual alarm. Repeat the above steps to set Alarm 2
Turning off the alarm
• To turn the Alarm OFF, press any of the stop keys:
• The Alarm clock will repeat the function at the same time the next day.
• The alarm and light will last for 60 minutes until the user presses the stop keys.
Cancelling/disabling the alarm function:
• To cancel the alarm function, press
7. Nap Timer
• When there is no music and radio, press [15] to activate the Nap timer. The alarm will sound after
the selected time.
• It will count down from the default 10 to 90 minutes. There are several user options: 90, 80, 70, 60,
50, 40, 30, 20, 10 and OFF.
• When the alarm sounds, the projection will come on automatically. Press the stop key
off the sound and light.
• If the user wants to cancel the function, press the Nap timer (15) again and select "OFF".
8. Sleep Timer
• When either the music (with or without projection) or radio is ON, press [4] to activate the Sleep
timer. The sound and projection will stop after the selected time.
• It will start to count down from the default 10 to 90 minutes. There are several user options: 90, 80,
70, 60, 50, 40, 30, 20, 10 and OFF.
• To remind the user that the Sleep Timer function is ON. The LED will display the sign (SL XX) with
the number of minutes left 15 seconds after the user has set the Timer.
• If the user wants to cancel the function, press the Sleep timer (4) again and select "OFF".
9. Projector ON / OFF
• Press (10) to turn on the projector. The projector will project colourful designs onto the wall and
ceiling. Press Projector (10) again to turn off the light.
There are 3 removable projection plates (4) for the user to fit on top of the unit and display the
desired graphics
• Turn the cover right/left to open and close.
10. Listen to FM radio
• Press Power On
e.g. FM92.6 MHz
• In radio mode, press and hold
seconds to search for the next station.
• Volume+ / -
or
Turn to close
and [2] to turn on the radio mode. The LED will display the current frequency
skip - or
(8, 9) to increase or decrease the volume when the sound is playing.
. To resume the function, press the button again.
• 2 Plates with designs
• 1 plate – solid white without design.
Turn to open
skip + (19, 20) to tune the signal and hold for 3
- FR 6 -
.
.
to turn