Grohe Sensia ARENA 39354SH1 Guide D'utilisation Rapide page 18

Smartphone Operation
Initial setup of the "Sensia Arena" app
Before setup, switch ON the Bluetooth of the smartphone.
Open the app and confirm the Disclaimer.
Push the (stop) and
water/dryer temperature adjust)
buttons simultaneously for more than
2 seconds.
Pair the toilet with smartphone
according to the "Pairing registration".
Precautions on Using Bluetooth
Keep the seat unit and remote control away from devices that emit radio waves.
Keep the seat unit and remote control away from the following devices as far as possible to prevent adverse effect caused by radio wave
interference.
• Microwaves / Wireless LAN devices / Bluetooth
• Near other devices that emit radio waves in the 2.4 GHz bandwidth (Digital cordless telephones, wireless audio devices, game consoles, PC
peripheral devices, etc.)
• If you are wearing an implantable cardioverter defibrillator (cardiac pacemaker), keep the remote controller away at least 22 cm from the
implant.
Inserting the Battery for First Time
Insert 2-AAA batteries in the remote control.
[WELCOME] will be displayed for 2 seconds, and GROHE logo will blink in color blue 3 times.
* Turn-on the toilet when [DURING THE POWER-OFF. PRESS THE POWER BUTTON] is displayed. It
will be displayed when the toilet is power-off.
[TO PAIR, BRING REMOTE NEAR TO TOILET AND PRESS OK] will be displayed. Take the remote
control close to the toilet and press "OK".
When the pairing is completed, [SUCCESS] will be displayed, and GROHE logo will blink in color
blue 3 times.
Press any buttons to return to the home screen.
* Press any back buttons to switch to home screen. If there is no operation of back buttons for 30
seconds, back screen will turn-off automatically.
17
GB
/
iOS Android
AGREE
(minus of
00:00:00
00:00:02
®
compatible devices other than smartphones
®
Pairing registration
Tap the app top page.
When the [Bluetooth pairing request]
message appears, confirm the device
[Shower Toilet] and tap [Pair].
Pair
The toilet unit indicates pairing is complete when you
hear a tone. Once you completed the pairing, there is
no need for a new Initial setup the next time.
Note
Be careful not to drop the smartphone in the toilet. We will
not take any responsibility for it.
00:01:00