Interface Box Setup - Panasonic AG-MBX10G Mode D'emploi

Interface Box Setup

Installing an SSD (Solid State Drive)
Install an SSD into the interface box.
 NOtE:
• Do not install a hard disk drive in the interface box.
1
Remove the five screws in the interface box and remove
the top lid.
2
Slide the SSD into the box while taking care to align the
connectors on the SSD with those in the box.
NOtE:

• Do not insert the SSD at an angle as the connectors
could be damaged.
Back side Back side
Use a No. 0 Phillips screwdriver Use a No. 0 Phillips screwdriver
to remove the screws. to remove the screws.
Connectors Connectors
SSD SSD
E-