Control Reference Guide - Panasonic AG-MBX10G Mode D'emploi

Control Reference Guide

5 5 4 4
6 6
1 1 2 2 3 3
1.
AG-MSU10 connectors
Connectors for connecting the interface
box to the AG-MSU10 Mobile Storage
Unit.
2.
USB 2.0 connector (POWER connector)
Use the USB cable to connect this
connector to a USB 2.0 connector on a
personal computer to power the drive
from the computer.
3.
USB 2.0 connector (SIGNAL connector)
Use the USB cable to connect this
connector to a USB 2.0 connector on a
personal computer to power the drive
from the computer and to transfer data
between devices.
4.
WARNING LED
Lights to indicate that not enough power
is supplied.
 For details, refer to "Checking Bus
Power Operation" (page E-13).
5.
POWER/ACCESS LED
Green: Power is supplied and the
device is ready to use.
Orange: The host is accessing the
device.
NOtE:

• POWER/ACCESS LED operation
depends on the installed SSD.
6.
eSAtA connector
Use the eSATA cable to connect this
E-0