Replacing The Batteries; Troubleshooting; Cleaning And Maintenance - Waeco AirCon Service VES100 Notice D'utilisation

Replacing the batteries

6.5 Repeating the process
➤ After charging or recovering, press the "Repeat" button (fig. 3 5,
page 3), in order to charge the previously selected weight again.
7 Replacing the batteries
➤ Open the cover on the back of the hand display.
➤ Replace the batteries (9 V).
➤ Close the cover.
8

Troubleshooting

Problem
"ERROR" is shown on
the display.
The display does not
react.
9

Cleaning and maintenance

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning
as these may damage the product.
➤ Occasionally clean the product with a damp cloth.
24
Remedy
Press the "Power" button and wait for 3 seconds. Press
the "Power" button again to restart the system.
VES100
EN