Use; Selecting The Weight Unit - Waeco AirCon Service VES100 Notice D'utilisation

VES100
6

Use

A
NOTICE!
Ensure the scales' maximum capacity is not exceeded as this
many damage the refrigerant scales.
I
NOTE
 The scales can be set up in the case as well as outside the
case. The scale must be on a flat surface and must not
touch the connection cable as this may otherwise affect the
precision.
 Place the refrigerant bottle at the centre of the scale and
ensure you do not shake the refrigerant beforehand.
 Cover the "Input" and "Output" connections with the safety
caps prior to each use.
 Switch off the refrigerant scale after every use. Remove the
batteries if the device is to be stored, or will not be used for an
extended period.
6.1

Selecting the weight unit

The refrigerant unit has three weight units: kilogrammes (kg), ounces (oz)
and pounds (lb).
➤ Press the "Function" button (fig. 4 2 page 3) several times, in order to
select the weight unit required.
6.2 Switching on the backlight
The backlight switches off automatically after 30 minutes without a button
being pressed.
➤ Press the "Light" button (fig. 4 3, page 3) to switch the backlight of the
display on or off.
EN
Use
21