Pentair STA-RITE VSD 6 M/T Instructions De Service page 13

EN
SHORT GUIDE IN CASE OF FAULTS
ALARMS FOR INDIVIDUAL INSTALLATION.
switches off or depending on the model). Use the buttons
the button ENTER to exit the alarms management function and return to manual mode.
*
•
A1 INSUFFICIENT WATER ( * CHECK FAULT, • DEFINITIVE FAULT):
(Automatic Reset) will be activated
•
START/STOP (check that the or
disable it).
•
•
•
A2 OVERLOAD ( * CHECK FAULT, DEFINITIVE FAULT):
•
A3 PUMP OFF ( DEFINITIVE FAULT):
contact technical support (see Fig. 1).
•
A5 DAMAGED TRANSDUCER ( DEFINITIVE FAULT):
20
ON/OFF (the PUMP led or
AUT LEDs are switched off, otherwise press the ON/OFF button to
•
A6 EXCESSIVE TEMPERATURE ( DEFINITIVE FAULT):
pump out of service.
technical support
•
A7 SHORT CIRCUIT ( DEFINITIVE FAULT):
A8 OVERVOLTAGE ( * CHECK FAULT):
A9 LOW VOLTAGE ( * CHECK FAULT):
BLANK DISPLAY:
IN MASTER & SLAVE MODE.
fails, the devices will remain disabled.
EN
21