GE GUD24ESSJWW Instructions D'installation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6
24" MODELS ONLY:
DRYER EXHAUST TO RIGHT, LEFT OR
BOTTOM CABINET
WARNING -
THIS EXHAUST INSTALLATION, BE SURE
TO DISCONNECT THE APPLIANCE FROM
ITS ELECTRICAL SUPPLY. PROTECT YOUR
HANDS AND ARMS FROM SHARP EDGES
WHEN WORKING INSIDE THE CABINET. BE
SURE TO WEAR GLOVES.
For downward venting, rotate elbow
sections so that elbow points downward
REMOVE
DESIRED
ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
• Rotate elbow sections so that the opening points to the
side to which you want to vent. Preassemble 4" elbow with
4" duct. Use only 4" UL approved rigid metal for ducting
inside the dryer.
• Connect duct assembly to the internal elbow.
WARNING-
electrical wires inside the dryer when inserting the duct.
4" UL approved rigid metal
Installation Instructions
BEFORE PERFORMING
Be sure not to pull or damage the
DUCT
TAPE
• Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
27" MODELS ONLY:
DRYER EXHAUST TO RIGHT, LEFT OR
BOTTOM CABINET
WARNING -
THIS EXHAUST INSTALLATION, BE SURE
TO DISCONNECT THE APPLIANCE FROM
ITS ELECTRICAL SUPPLY. PROTECT YOUR
HANDS AND ARMS FROM SHARP EDGES
WHEN WORKING INSIDE THE CABINET. BE
SURE TO WEAR GLOVES.
For downward venting, rotate elbow
sections so that elbow points downward.
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
• Rotate elbow sections so that the opening points to the
side to which you want to vent. Preassemble 4" elbow with
4" duct. Use only 4" UL approved rigid metal for ducting
inside the dryer.
• Connect duct assembly to the internal elbow.
WARNING-
electrical wires inside the dryer when inserting the duct.
• Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
9
WARNING-
Internal duct joints must be
secured with tape, otherwise
they may separate and cause
a safety hazard.
BEFORE PERFORMING
Be sure not to pull or damage the
WARNING-
Internal duct joints must be
secured with tape, otherwise
they may separate and cause
a safety hazard.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gud27essjwwGud27essj0ww

Table des Matières