Technical & Consumer Information - LONCIN 160F Mode D'emploi

9. TECHNICAL & CONSUMER INFORMATION
TECHNICAL INFORMATION
Serial Number Location
Record the engine serial number in the space below. You will need this serial number
when ordering parts, and when making technical or warranty inquires.
Engine serial number:
Battery Connections for Electric Starter
Use a 12-volt battery with an ampere-hour rating of at least 18 Ah.
Be careful not to connect the battery in reverse polarity, as this will short circuit the battery
charging system. Always connect the positive (+) battery cable to the battery terminal
before connecting the negative (-) battery cable, so your tools cannot cause a short circuit
if they touch a grounded part while tightening the positive (+) battery cable end.
1. Connect the battery positive (+) cable to the starter solenoid terminal as shown.
2. Connect the battery negative (-) cable to an engine mounting bolt, frame bolt, or other
good engine ground connection.
3. Connect the battery positive (+) cable to the battery positive (+) terminal as shown.
4. Connect the battery negative (-) cable to the battery negative (-) terminal as shown.
5. Coat the terminals and cable ends with grease.
TECHNICAL & CONSUMER INFORMATION
A battery can explode if you do not
follow the correct procedure,
seriously injuring anyone nearby.
Keep all sparks, open flames, and
smoking materials away from the
battery.
-26-
ENGINE TYPE
SERIAL NUMBER