Battery Charger; Testing Your - Dogtra 2500T Serie Mode D'emploi

BATTERY CHARGER

BATTERY CHARGER
Charging Cable
Two-dog unit only
The battery charger and charging cables
allow you to charge both the transmitter and
receiver at the same time. The battery charger is
designed for a 220-volt wall outlet. (U.S.A. 110-
volt AC chargers and 12-volt field charger for
Lithium-Polymer batteries for your automobile
are also available.)
To use the battery charger for the two-dog
unit, combine both sets of battery charging
(splitter) cables as shown. This enables you to
charge the transmitter and both receivers at the
same time.
NOTE : Only use Dogtra-approved Lithium-
Polymer Battery Chargers for your Dogtra
e-collar. This will prevent any damage that
can be incurred from attempting to use a
different charger.
72
220 volt
Charger
Wall Outlet

TESTING YOUR

1. To activate the
place the red dot on the back of the
transmitter to the red dot on the collar
receiver. Hold the two red dots together for
a moment until the green color LED
indicator light comes on.
The collar/receiver emits the Power-on
melody and turns on.
2. Place the Test light included in the package
contents on the contact points as shown in
the diagram.
TESTING
COLLAR
,
73