Using The Laser Guide; To Remove Your Mark; To Cut On Your Mark; To Cut Without Removing Your Mark - ShopMaster DELTA Série Manuel D'utilisation

USING THE LASER GUIDE

Refer to Figure 15.
When the laser guide switch is turned on it projects a red
line onto the work surface enabling you to see your cut
before you make it. To ensure a true and straight cut:
1. Make sure the saw is unplugged.
2. Draw a line on the workpiece where you plan to cut.
3. Flip the laser switch (A) to the "ON" position.
4. The red line (B) indicates the path of the blade.
5. Align the laser line and the mark with the blade at the
uppermost position.
6. Once both lines are in alignment, do not move the
workpiece.
7. Plug the saw into the power source.
8. Make several practice cuts on different styles and
thickness of material.
9. Repeat the steps above as necessary.

TO REMOVE YOUR MARK:

Position the laser line near the left edge of your mark on
the work surface in order to cut through the mark.

TO CUT ON YOUR MARK:

Position the laser line near or over your mark on the work
surface in order to cut the mark.
TO CUT WITHOUT REMOVING YOUR
MARK:
Position the laser line near the right edge of your mark on
the work surface in order to leave the mark.
After you have become familiar with using the laser
guide, you will be able to remove, cut, or leave your mark
on the work surface. Practice will teach you the correct
position for aligning the laser line with your mark.
• Avoid direct eye exposure to laser beam or reflection.
Intense or prolonged exposure to laser radiation
could permanently damage your eyes. Do not project
or reflect the laser into anyone's eyes, including your
own.
• Caution -- use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
• Do not disassemble or modify the laser. There are no
user serviceable parts inside. Serious eye injury could
result.
• Use or modification of the laser guide for anything
other than its designed purpose may result in
hazardous radiation exposure.

FREE WARNING LABEL REPLACEMENT

If your warning labels become illegible or are missing,
call1-800-223-7278 for a free replacement.
PREPARING YOUR SAW FOR USE
EXEMPLE DE NUMÉRO DE SÉRIE,
UNIQUEMENT À DES FINS DE RÉFÉRENCE
14
A
B
14A0000012114O1CT
FIGURE 15