Important Safety Instructions - Leister FUSION 1 Mode D'emploi

Operating instructions
EN
Congratulations on your purchase of the FUSION 1.
You have chosen a first-class hot-air extrusion welder.
It has been developed and produced in accordance with the very latest standards of technology in the plas-
tics-processing industry. It has also been manufactured using high-quality materials.
Read through the operating instructions before commissioning for the first time.
Always store these operating instructions with the device.
Do not pass the device on to anyone else without the operating instructions.
LEISTER FUSION 1
manual extrusion welder

1. Important safety instructions

In addition to the safety instructions contained in the individual chapters of these operating instructions, the
following provisions must also be followed.
20
Warning
Danger to life
Disconnect the power plug from the socket before opening the device, as
live components and connections will be exposed.
Danger of fire and explosion
If the device is used improperly, there will be a danger of fire and explosion (e.g., due
to the material overheating), particularly in the vicinity of flammable materials and
explosive gases.
Risk of burning
Do not touch exposed metal parts or escaping material while they are hot. The
device should always be allowed to cool down first. Do not point the hot air flow
or escaping material at people or animals.
Caution
The nominal voltage specified on the device must match the local line voltage.
If the line voltage fails, then the main switch and the drive must be switched off
(extend hot-air blower).
If the device is being used on construction sites, an FI protective switch must be
FI
used to protect site personnel.
The device may only be used under supervision. Waste heat can come into
contact with flammable materials that are not in view.
The device may only be operated by trained specialists or under their supervi-
sion. Children are not permitted to operate the device under any circumstances.
Protect the device from moisture and wet conditions.
(translation of original operating instructions)