Installation Cautions - Samsung RF26HF Serie Guide D'utilisation

SEVERE WARNING SIGNS
FOR INSTALLATION
WARNING
• Do not install the refrigerator in a damp
place or place where it may come in
contact with water.
- Deteriorated insulation of electrical parts may
cause an electric shock or fi re.
• Do not place this refrigerator in direct sunlight
or expose to the heat from stoves, room
heaters or other appliance.
• Do not plug several appliances into the same
multiple power strip. The refrigerator should
always be plugged into its own individual
electrical outlet which has a voltage rating that
matches the voltage listed on the refrigerator's
rating plate.
- This provides the best performance and
also prevents overloading house wiring
circuits, which could cause a fi re hazard from
overheated wires.
• If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fi re.
• Do not use a cord that shows cracks or abrasion
damage along its length or at either end.
• Do not bend the power cord excessively or
place heavy articles on it.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
- When moving the refrigerator, be careful not to
roll over or damage the power cord
- This may result in an electric shock or fi re.
• Never unplug your refrigerator by pulling on the
power cord. Always grip plug fi rmly and pull
straight out from the outlet.
- Damage to the cord may cause a short-circuit,
fi re and/or electric shock.
• Do not use aerosols near the refrigerator.
- Aerosols used near the refrigerator may cause
an explosion or fi re.
• Do not install this appliance near a heater,
infl ammable material.
• Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
• Do not install this appliance in a location where
gas may leak.
- This may result in an electric shock or fi re.
DA68-02601C-00.indb 3 DA68-02601C-00.indb 3
• This refrigerator must be properly
installed and located in accordance with
the manual before you use it.
• Connect the power plug in the proper position
with the cord hanging down.
- If you connect the power plug upside down,
the wire can get cut off and cause a fi re or
electric shock.
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This constitutes a fi re hazard.
• Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of
children.
- There is a risk of death from suffocation if a child
puts the packing materials on his or her head.
• The appliance must be positioned so that the
plug is accessible after installation.
• You need to remove all the protective plastic
fi lm before you initially plug the product in.
• The refrigerator must be safely
grounded.
- Always make sure that you have
grounded the refrigerator before
attempting to investigate or repair any
part of the appliance. Power leakages
can cause severe electric shock.
• Never use gas pipes, telephone lines or other
potential lightning attractors as an electrical
ground.
- Improper use of the grounding plug can result
in a risk of electric shock. If it is necessary
to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating
of the extension cord should be AC115-120 V,
10 A, or more. If a grounding adapter is used,
make sure the receptacle box is fully grounded.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.

INSTALLATION CAUTIONS

CAUTION
• Allow suffi cient space to install the
refrigerator on a fl at surface.
- If your refrigerator is not level, the internal
cooling system may not work correctly.
English - 3
2014. 8. 18. 2014. 8. 18. 8:45 8:45