Samsung RF26HF Serie Guide D'utilisation page 13

Masquer les pouces Voir aussi pour RF26HF Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. After adjusting the doors, insert the supplied
fastener ( 6 ) using a pliers ( 5 ) in the gap
between the hinge-grommet ( 7 ) and the lower
hinge ( 8 ). The number of fasteners you'll need
to insert depends on the gap.
2 fastener are enclosed with the
refrigerator.
The thickness of each fastener is 0.04".
CONNECT THE WATER LINE
TO THE FRIDGE
• Connect the plastic line on the back of your
fridge to the cartridge holder outlet (fully insert
the plastic line to the cartridge holder outlet).
• Insert plastic clip to the cartridge holder inlet
and outlet.
• Turn water on and check for any leakage.
• You can purchase the necessary fi lter
cartridge at the retailer where you
purchased this refrigerator.
• The water line must be connected to
drinkable water only
• A compression fi tting and nut kit is
supplied with the unit and it is inside the
fridge drawer.
• When pushing the Refrigerator back,
make sure you don't roll over the power
cord or water line(Icemaker supply line)
Plastic line
Plastic line
(Provided)
(Provided)
DA68-02601C-00.indb 13
DA68-02601C-00.indb 13
TO USE WITHOUT THE WATER
FILTER
Connecting to the water supply line
• Shut off the main water supply line and turn
• Locate the nearest cold water drinking line.
Connect the water line to the fridge
Cartridge
Cartridge
Holder
Holder
Clip
Clip
1. Slip the compression nut through the plastic
2. After inserting the compression nut into plastic
Filter
Filter
cartridge
cartridge
English - 13
the Ice maker to the off position.
1
1
7
7
2
2
3
3
6
6
5
5
4
4
Household water line
Household water line
Copper tubing
Copper tubing
Plastic tubing
Plastic tubing
or or
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
Ferrule
Ferrule
(Purchased)
(Purchased)
Plastic Tubing
Plastic Tubing
(Provided)
(Provided)
Refrigerator
tubing.
tubing, tighten the compression nut onto 1/4"
compression fi tting(Provided).
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut.
7. Shut Off Valve
Compression
Compression
nut (1/4")
nut (1/4")
(Purchased)
(Purchased)
Bulb
Bulb
Compression
Compression
Fitting
Fitting
(Provided)
(Provided)
Compression
Compression
Nut (1/4")
Nut (1/4")
(Provided)
(Provided)
2014. 8. 18.
2014. 8. 18.
8:46
8:46

Publicité

Table des Matières
loading

Table des Matières