Table des Matières
Publicité
AGENTS IN CASE OF NEED.
PREPARATION FOR
INSTALLATION AND USE
Manufactured with best quality parts
and materials, this modern, functional
and practical oven will meet your ne-
eds in all respects. Make sure to read
the manual to obtain successful results
and not to experience any problems in
the future. The information given below
contain rules that are necessary for cor-
rect positioning and service operations.
They should be read without fail espe-
cially by the technician who will position
the appliance.
CONTACT THE AUTHORIZED SER-
VICE FOR INSTALLATION OF YOUR
OVEN!
CHOOSING A PLACE FOR THE
OVEN
– There are several points to pay atten-
tion to when choosing a place for your
oven. Make sure to take into account
our recommendations below in order
to prevent any problems and dange-
rous situations, which might occur
later!
– When choosing a place for the oven,
attention should be paid that there are
no flammable or combustible materi-
als in the close vicinity, such as curta-
ins, oil, cloth etc. which quickly catch
fire.
– Furnitures surrounding the oven must
be made of materials resistant to heat
more than 50 C° of the room tempe-
rature.
Required changes to wall cabinets and
exhaust fans above the built-in combi-
ned product as well as minimum he-
ights from the oven board are shown in
Figure 1. Accordingly, the exhaust fan
should be at a minimum height of 65 cm
from the hob board. If there is no ex-
haust fan the height should not be less
than 70 cm.
INSTALLATION OF BUILT-IN
OVEN
HOB
Publicité
Table des Matières
