NZXT N7 Z370 Mode D'emploi page 29

Dual BIOS Switch & ROM Back Up
Located here is the "Dual BIOS switch" and "ROM_BACKUP" button. The N7 has two
built-in BIOS ROMs with the Primary set to A. If the Primary fails, you can switch to
B to load the Secondary BIOS ROM and revert the Primary BIOS back to factory (see
BIOS Back Up).
BIOS Back Up
When the Primary BIOS fails, perform the following steps to revert to the factory
BIOS.
• Turn off the power and remove the AC power to the power supply. Allow 30
seconds to ensure no standby power exists.
• Flip the "Dual BIOS switch" to B and reconnect power to the power supply. The
ROM LED will glow indicating the Secondary BIOS has been loaded.
• Boot into BIOS and navigate to Power Management under the Advanced Menu.
Disable EUP Function then proceed to save changes and reboot.
• Power off the PC and press and hold the "ROM_BACKUP" button for 5 seconds.
• The ROM LED will blink indicating it is currently loading the Secondary BIOS
ROM into the Primary BIOS ROM.
• Back up is finished if the ROM LED remains on.
• Turn off the power and remove the AC power to the PC. Allow 30 seconds to
ensure no standby power exists.
• Flip the switch to side A to load the Primary BIOS.
Z 3 7 0 A T X M O T H E R B O A R D
B A
25