NZXT N7 Z370 Mode D'emploi page 17

Z 3 7 0 A T X M O T H E R B O A R D
• Close the latch and push down on the retention arm to lock it into place.
• The plastic protective cap will automatically become loosen.
• Apply thermal paste as needed and install your CPU cooler.
Note
• Always unplug the power cord from the power outlet before installing or removing the CPU.
• Please retain the CPU protective cap after installing the CPU.
• Confirm that the CPU heatsink has been mounted properly before booting.
• Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic
protective cap.
• Please refer to the CPU cooler manufacturer's instructions to install your cooler.
13