Product Presentation; Technical Information - NORAUTO HF400 Mode D'emploi

SAFETY INSTRUCTIONS REGARDING BATTERIES
- Worn-out batteries must be safely scrapped. Read the
"Disposal of this product" chapter in this manual to learn
more about recycling and environment protection.
- Respect the technical specifications of the batteries that you
want to charge, along with the corresponding specific
recommendations (for example: how to insert and connect
the battery, charge rate, etc.).
- Do not recharge dry-cell batteries commonly used in
household appliances. It may cause a fire and damage to
persons.
- This appliance must be used exclusively on automotive
vehicle batteries with 12Vdc voltage. Do not connect the
appliance to other type of systems (6Vdc, 24Vdc, etc.).

PRODUCT PRESENTATION

A. Technical information
Model
Input
Output
Fuse
Battery type
Charging current
Capacity
- Multi-step microprocessor controlled charge.
- Charge with clamps.
- Reverse polarity indicator.
- Automatic power outage recovery.
- Automatic floating mode at the end of the charging process
- Short circuit protection
HF400
220-240V AC, 50/60Hz, 1.2A
12Vdc, 4A
4A
Lead Acid, WET, GEL, AGM
4 Amp
12V batteries / 10Ah to 80 Ah (up to 260Ah in floating mode)
86