Meaning Of The Leds And Acoustic Signals; Leds On The Transmitter; Acoustic Signals Of The Receiver - Sennheiser RS 4200 Notice D'emploi

Meaning of the LEDs and acoustic signals

LEDs on the transmitter

LED
Operation indication
Charging control LED of receiver
rechargeable battery
Charging control LED of spare
rechargeable battery
Speech intelligibility" button

Acoustic signals of the receiver

Acoustic signal
6 short beeps
2 long beeps
1, 2 or 3 beeps after
having pressed the
TUNE button
Meaning
No audio signal
(transmitter is not
activated or out of
range)
Rechargeable battery is
flat
Receiver is tuned to
channel 1, 2 or 3
Status Meaning
lit green Transmitter is switched on
off Transmitter is switched off
lit red Spare rechargeable
battery or rechargeable
battery is being charged
lit green Rechargeable battery is
fully charged
lit yellow Speech enhancement is
activated
Commentary
Automatic switch-off after
approx. 3 minutes
Automatic switch-off after
approx. 10 minutes
These beeps can be switched off
by pressing the
for 5 seconds while the receiver is
switched on.
TUNE button
13