Putting The System Into Operation; Setting Up The Transmitter; Connecting The Transmitter To The Sound Source - Sennheiser RS 4200 Notice D'emploi

6

Putting the system into operation

Setting up the transmitter

Choose a suitable place near your sound source (e.g. TV).
Note:
Do not place the transmitter close to metal objects such as
shelf bars, reinforced concrete walls, etc. as this can
decrease the transmitter's range.
It is not necessary that the transmitter and stethoset
receiver are in a direct line of sight, so you can move around
freely in the home or outside in the garden.
One transmitter can be used to transmit to several receivers
on the same frequency.

Connecting the transmitter to the sound source

Plug in one end of the connecting cable
socket on the transmitter.
Check the connection possibilities of your sound source (e.g.
TV).
A
TV
Headphone RCA sockets
socket
B
TV
L R
SCART socket External
to the blue AUDIO
C
AV
No socket
microphone
D