Victory Motorcycles Vegas 2010 Manuel D'utilisation page 56

Pre-Ride Inspections
Throttle
1. Rotate the throttle control grip. It should rotate smoothly
from the rest position to the completely open position. It
should return to the rest position quickly when released.
2. Remove the right side access cover. Inspect throttle
cables for frayed ends.
3. Service the throttle system if throttle operation is not
smooth, if throttle grip does not return properly, or if
cable ends are frayed. See the VICTORY Service Manual
or your authorized VICTORY dealer.
Throttle Freeplay
Throttle freeplay is the amount of throttle control grip movement from the rest
position to the point of cable resistance. Measure this distance. Freeplay
should be 2-4 mm. Adjust throttle freeplay as needed. See page 99.
54
Throttle
Access
Cable Ends
Cover
2-4 mm