Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Sidestand Lubrication
1. Secure the motorcycle in a fully upright position using an appropriate motorcycle lift or a block of wood or steel
placed securely under the frame. Move the sidestand upward to its stored position.
CAUTION! Wear face protection. The sidestand return spring is under tension and can injure your eyes and face when released.
2. Hold the nut and remove the sidestand pivot bolt and sidestand return spring.
3. Wipe any old grease and dirt from the sidestand, frame and pivot bolt.
Lubricate the sidestand, the pivot bolt and the ends of the spring with
VICTORY All Purpose Grease or equivalent.
4. Reinstall the sidestand spring and place the sidestand on the mounting
boss with the stand in the stored (up) position.
5. Install the pivot bolt and tighten it while holding the nut.
Torque: 35 ft-lbs (47 Nm)
6. Verify that the sidestand moves freely through its pivot range.
Universal Tool
The universal tool is located in a holder under the left side cover. The uni-
versal tool is a combination 6 mm hexagonal wrench with a Phillips
screwdriver tip. It can be used to service the following items (if equipped):
• Oil drain plug
• Air filter
124
• Headlight lamp
• Accessory fasteners
• Indicator/turn signal lamps
• Handlebar Adjustments
• Passenger Seat
Publicité
Chapitres
Table des Matières
