Scott NERO PLUS Consignes D'utilisation page 7

ASTM Directives : ASTM F1952-15
Distribution USA : SCOTT USA Inc., 651 West Critchlow Drive, Ogden, UT 84404, USA.
Distribution Australia / N ew Zealand : SHEPPARD CYCLES, PO Box 62067, NZ-1644 Auckland.
Distribution in the EU and worldwide outside the USA, Australia and New Zealand : SCOTT
Sports SA, Rte du Crochet 17, CH-1762 Givisiez, Switzerland
THE LABEL INSIDE THE HELMET CONTAINS FOLLOWING INFORMATION
EN 1078
FRONT
SIZE
57-58cm / 22.45-22.85"
APPROX.WEIGHT
1220g
DATE OF MANUFACTURING
MM.DD.YYYY
©SCOTT SPORTS SA 2017. All rights reserved. Rev. 01 of 10.2017. The information contained in this
manual is in various languages but only the English version will be relevant in case of conflict.
WARNING
THIS SCOTT HELMET CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
Marking of conformity.
Indicates compliance with EN 1078, a European standard regarding
helmets for pedal cyclists and for users of skateboards and roller skates.
Indicates compliance with the standard safety requirements for
Downhill Mountain Bicycle racing.
Indicates compliance with the standard safety requirements of the
United States Consumer Product Safety Commission.
Icon indicates the specific sport in which the protector is designed to
be used: not for motosports.
Do not remove the labels on the inside of the helmet.
Do not use cleaning products on the helmet.
Use only soap and water to clean the helmet.
Do not use petroleum-based solvents or automotive wax to clean or
polish the helmet.
Indicates the direction of the front of the helmet.
Caution – Read the user manual before using the helmet. More specific
information regarding the product is indicated in the user manual.
Manufacturing date.
WWW.SCOTT-SPORTS.COM