Reality Leuchten R039-01 Mode D'emploi page 7

22. Indicator
17. "WATER COOLING" The device has a room humidifying function which contributes to an additional cooling effect.
24. Indicator
18. "SWING" The device is equipped with an oscillation function that allows the fan to oscillate with simultaneous
ventilation.
21. Indicator
19. "WIND MODEL" The device has 2 different fan modes.
• night mode: In this mode, the speed is gradually reduced depending on the set speed. If you have set it to "High", the
device will run for 30 minutes at high speed, 30 minutes at medium speed and then continuously at low speed.
26. Indicator
• natural mode: Is indicated by the trees (25) in the display and adjusts the air speed automatically.
25. Indicator
Maintenance
We recommend only filling the water tank with distilled water. The water filter should be changed every 6 months or
when you feel that the air cooler is not working properly.
In order to change the filter (6), first loosen the screw centred over the air intake (5). Push down the clamps to the right
and left and pull the protective grille towards you. Press the release tabs together on both sides at the top end of the filter
holder and remove the holder. Now you can simply remove the light blue filter and change it. Now reinstall the new filter
in the reverse order.
Technical Information
Power Rating: 75W
Service Value: 0,24 (m³/min)/W
Fan Sound Power Level: 25 // 29 // 35 dB(A)
Max. Fan Flow Rate: 14,5 m³/min
Stand By Power Consumption: 0,7W
Max. Air Velocity: 5,3 // 6,2 // 7,3 m/s