Reality Leuchten R035-32 Mode D'emploi page 6

Keep all safety instructions and instructions for future reference.
Care
Only clean the device when it is switched off and with the mains plug unplugged. Use a soft, lint-free cloth. This can be
slightly moistened if necessary. Avoid contact with electrical components and moisture. After cleaning, allow the device to
dry completely before putting it back into operation. Do not use aggressive cleaning agents.
Commissioning
Before commissioning, please check the correct installation of the protective screens again; there is a risk of injury if they
are not installed correctly. Generally, the device may only be operated when completely assembled. Make sure that the
connected supply cable is free of damage. Never operate a device with a defective supply cable. There is a risk of electric
shock. Position the device upright and stable. When positioning the fan, make sure that curtains or other objects do not
obstruct the air flow. Insert the power plug into a properly fused power socket.
Assembly
1. Oscillating Knob
2. On / Off / Speed Knob
3. Tilt Range Knob
4. Tilt Adjustment Bolt
5. Stand Top
6. Stand Securing Screws
7. Base Washer
8. Base Thumb Screw
9. Fan Head
10. Tilt Range Screw
11. Tilt Adjustment Knob
12. Wooden Stand
13. Stand Holder
14. Base
15. Fan Head Motor
16. Coupling