Assembly Prior To Initial Startup - Heylo BT 450 Manuel D'utilisation

4. Assembly prior to initial startup

Handle assembly
1. Remove both screws from the top of front cover (A).
2. Fold the front cover forward (B).
3. Remove the handle from the transport position (at time of delivery, handle
points downwards in the cardboard box) (C).
4. Attach the handle in upright position. Observe the position of the washers and
self-locking nuts (D)
A
Condensate hose assembly
1. For better handling you may pull ventilator cover (E) off towards the top during
the assembly steps.
2. Slide hose clip (F) onto condensate hose (G), which can be found in the inside
of the unit.
3. Insert adapter (H) through the provided opening in the housing and connect
adapter (H) with condensate hose (G) using hose clip (F)
4.
Now, condensate hose (I) with the quick-disconnect connection can be slid onto
adapter (H).
B
C
E
I
H
23
D
F
G
EN