Kobalt SGY-AIR176 Mode D'emploi page 4

SA FETY INFORMATION
WA R N I N G
WHAT COULD HAPPEN
Eyes and face can come into direct
contact with sprayed materials, causing
serious injury.
Spraying improper materials or materials
not intended for spray application could
result in serious injury or death.
Certain materials that can be used with
sprayers may cause skin irritation if they
come in direct contact with skin.
This tool is capable of spraying
flammable materials which can result in
fire or explosion.
Paint Sprayer Hazards
HOW TO PREVENT IT
Never aim or spray at yourself or anyone
else.
Always wear ANSI approved Z87.1 safety
glasses with side shields.
Always wear an approved NIOSH –
approved respirator during use.
Always wear nitrile gloves.
Always wear protective clothing when
spraying.
Always spray in a well ventilated area to
prevent health and fire hazards.
If eyes or face come into direct contact with
sprayed materials, contact your local doctor
or emergency room for immediate help.
Do not spray acids, corrosive materials,
toxic chemicals, fertilizers or pesticides.
Always read the label or Safety Data
Sheets (SDS) for the materials and/or
chemicals before spraying to ensure they
are safe to use.
Always use a face mask/respirator and
protective clothing when spraying.
Always read the label or Safety Data
Sheets (SDS) for the materials and/or
chemicals before spraying to determine if
they pose a risk of cause skin irritation.
Never operate sprayer in the vicinity of
open flame or near ignition sources
(pilot lights, cigarettes, portable electric
lamps, etc).
Never operate tools near flammable
substances such as gasoline, naphtha,
cleaning solvents, etc.
Work in a clean, well ventilated area
free of combustible materials.
Never use oxygen, carbon dioxide or
other bottled gasses as a power source
for air tools.
Ground all equipment in the work area.
4