Important - Kobalt SGY-AIR176 Mode D'emploi

AIR SUPPLY SET-UP

IMPORTANT:

Make sure the Paint Filter (K) is
installed in the bottom of the Paint Cup (F) prior to
attaching the Paint Cup to the sprayer.
4. Remove the Cup Lid (G) and attach the Paint Cup
(F) to Air Paint Sprayer. Tighten by turning
clockwise, using the wrench (J) (19mm) to tighten
securely.
5. Replace the Cup Lid (G). Connect the air hose
coupling to the female plug and turn on the
compressor.
6. Fully open the Air Adjustment Knob (E). While
pulling the gun trigger on the paint sprayer, adjust
the air compressor pressure up or down until the
Air Pressure Regulator (H) on the paint sprayer is
within the green range.
4
5
6
7
12
F
J
G
Load paint
F
E
H
K
F
Lid