Connect To A Tv Set; Specifications - Reflecta Film Scanner Super 8 Mode D'emploi

Connect to a TV set

You can use your TV screen as the default screen.
1. Turn on the reflecta Film Scanner and TV.
2. Set TV input to A (or TV, TV) mode.
3. Connect the Film Scanner "TV OUT" port to your TV's Video-In port
(yellow) with the included TV-Out cable.
4. The LCD screen on the Film Scanner will turn dark and the display will
be on your TV instead.

Specifications

Image sensor: 3.53 Megapixels (2304H x 1536V) 1/3" CMOS sensor
Display: Colour 2.4" TFT LCD
Exposure control: Auto/Manual (-2.0 to 2.0)
White Balance: Auto
Resolution: 1440 x 1080 p
Playback frame rate: 30 frames per second*
Scan method: Video
Film type: 8 mm and Super 8 roll film in 3" or 5" reel
File format: MP4
TV-OUT type: NTSC/PAL
Built-in memory: None
External memory: SD/SDHC memory card up to 32 GB (Max.)**
Power Supply: DC 12V
Interface: USB 2.0
Language: English, French, Spanish, German and Italian
Dimension (L/W/H): 269 x 166 x 114 mm/10.6 x 6.5 x 4.5 inch
Weight: 1410 g/3.1 lb
Note:
*Users who wish to modify playback speed to 18 or 24 ftps can download
"VLC", a free software from VLC.org not supported by reflecta.
**Each 50 ft film takes about 125 MB of memory and about 30 minutes to
record.
9