Seg one AP123 Manuel D'utilisation page 20

Cassette tape playback
1. When the unit is switched on, set the FUNCTION switch to select "TAPE"
(cassette).
2. Press the STOP/EJECT
3. Gently insert the cassette tape into the cassette
compartment as shown.
Note: The cassette compartment door is designed to
prevent the user from inserting the cassette upside
down. Improper cassette tape insertion may damage
the cassette deck inside the unit.
4. Close the cassette compartment.
5. To start playback, press the PLAY
6. To stop playback, press the STOP/EJECT
7. To pause playback, press the PAUSE
again.
8. To fast forward or fast rewind, press the F.FWD
Press the STOP/EJECT
Cassette tape recording
1. When the unit is switched on, set the FUNCTION switch to select the mode
(CD, TUNER) and launch playback.
2. Insert the cassette tape (see previous paragraph).
3. Press the PAUSE
4. Press the RECORD
standby.
5. Press the PAUSE
6. To stop recording, press the STOP/EJECT
7. To pause recording, press the PAUSE
again.
To erase a recorded cassette tape
1. Follow steps 1 to 5 in "Cassette tape playback" to play the cassette tape.
2. Press the RECORD
3. To stop erasing, press the STOP/EJECT
Cleaning the tape heads
To maintain optimum sound quality, clean the pinch roller (a),
capstan (b), playback/record heads (c) and erasure head (d)
regularly (every 10 hours of use). Use a cotton swab lightly
moistened with cleaning fluid or denatured alcohol.
CASSETTE TAPE OPERATION
button to open the cassette compartment.
button.
button to stop at the desired position.
button.
and PLAY
button again to start recording.
and PLAY buttons together to start erasing.
GB-8
button.
button. To resume playback, press it
or REWIND
buttons together to place recording in
button.
button. To resume recording, press it
button.
button.
a b c d