Lan - SilverCrest SWV 300 B2 Manuel D'utilisation Et Informations Sur Les Services

SilverCrest SWV 300 B2

LAN

The IP address used, the set DHCP Mode and the MAC address of the dual-
band wifi range extender are displayed here. Click on the LAN button to
adjust the network settings.
IP address
You can change the IP address of the dual-band wifi range extender here.
DHCP
You can set the DHCP Mode here. The following options can be selected:
Disable, Server and Auto. The Server option is enabled in the original
condition of the device. With the Server option, IP addresses are assigned
automatically, which is recorded in a table. This is in contrast to the Auto
option where the automatic assignment is permanent and will not be removed.
The advantage here is that an end device always has the same IP address. The
disadvantage is that new end devices do not receive an IP address if the
188 - English