Audio - NEC MultiSync LCD4010 Manuel Utilisateur

V RESOLUTION
*:INPUT RGB1/2/3 only
ZOOM MODE
SCREEN RESET
Main-Menu

AUDIO

Sub-Menu
BALANCE
TREBLE
BASS
AUDIO RESET
01_English
SCREEN
H POSITION V RESOLUTION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
ZOOM MODE
SCREEN RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
SCREEN ZOOM MODE
H POSITION CUSTOM
V POSITION OFF
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
ZOOM MODE
SCREEN RESET
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU :SEL
*:INPUT RGB1/2/3 only
ZOOM MODE
CUSTOMV
16:9
14:9
DYNAMIC
OFF
:SEL
*:INPUT DVD/HD, VIDEO only
CUSTOM
ZOOM
H ZOOM
V ZOOM
H POS
V POS
:SEL
SCREEN
H POSITION
SCREEN RESET
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
ZOOM MODE
SCREEN RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
AUDIO
BALANCE BALANCE
TREBLE
BASS
L
AUDIO RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
AUDIO
BALANCE TREBLE
TREBLE
BASS
AUDIO RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
AUDIO
BALANCE BASS
TREBLE
BASS
AUDIO RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
AUDIO
BALANCE AUDIO RESET
TREBLE
BASS
AUDIO RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
20
Adjusts the vertical size by increasing or decreasing the
setting.
Press + button to expand the height of the image on the
768
screen.
+ -:ADJ EXIT :RETURN MENU :EXIT MENU
Press - button to narrow the height of the image on
the screen.
Selects the screen zoom mode. Zoom mode will be
selected when you select the "ZOOM" by pushing the
"SIZE" button on remote controller.
When you select the "CUSTOM", you will be able to
SET :NEXT EXIT :RETURN MENU :EXIT MENU adjust optional horizontal and vertical size.
You can also select 16:9, 14:9 and DYNAMIC.
(INPUT DVD/HD,VIDEO only)
Press "SET" button to show a control menu as follows:
Increase or decrease "ZOOM" slider to adjust the whole
SET :NEXT EXIT :RETURN MENU :EXIT MENU
size and then adjust horizontal and vertical size by
H ZOOM and V ZOOM. Increase or decrease "H POS"
and "V POS" to adjust the picture position.
X 1.00
Selecting "DYNAMIC" will expand 4:3 pictures to the
X 1.00
X 1.00
entire screen with non-linearity. (Some around image
0%
0%
will be cut by expansion.) Dynamic image is the same
+ - :ADJ EXIT :RETURN MENU :EXIT MENU
as FULL size image when HDTV 1080i or 720p signal
is input.
Selecting "OFF" image will be displayed 1 by 1 pixel.
(If you input over 1366x768 resolution signal, it will be
displayed as shrank image.)
Selecting Screen reset allows you to reset all OSM
settings from SCREEN setting.
Select "Yes" and press "SET" button to restore the
NO
YES
factory preset data.
:SEL EXIT :RETURN MENU :EXIT MENU
Press "EXIT" button to cancel and then return to the
previous menu.
Adjust the balance of L/R volume.
Press + button to move the stereo sound image to right.
R CENTER
Sound of the left side will be small.
Press - button to move the stereo sound image to left.
+ -:ADJ EXIT :RETURN MENU :EXIT MENU
To accentuate or reduce the high frequency sound.
0
Press + button to increase TREBLE sound.
Press - button to decrease TREBLE sound.
+ -:ADJ EXIT :RETURN MENU :EXIT MENU
To accentuate or reduce the low frequency sound.
0
Press + button to increase BASS sound.
Press - button to decrease BASS sound.
+ -:ADJ EXIT :RETURN MENU :EXIT MENU
Selecting Audio reset allows you to reset all OSM
settings from AUDIO setting.
Select "Yes" and press "SET" button to restore the
NO
YES factory preset.
:SEL EXIT :RETURN MENU :EXIT MENU
Press "EXIT" button to cancel and then return to the
previous menu.
English-20
08/09/2005, 16:26
MAIN MENU
PICTURE
SCREEN
AUDIO
PIP
CONFIGURATION 1
CONFIGURATION 2
ADVANCED OPTION
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU