General Safety Precautions - Makita MLT100 Manuel D'instruction

ENGLISH
SPECIFICATIONS
Riving knife-related specs.
Max. cutting capacities
Maximum dado capacity
No load speed (RPM)
Table size (L x W)
Dimensions (L x W x H) with table not extended
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1. KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working
order.
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
Model
Arbor hole
Blade diameter
Blade body thickness
Riving knife thickness
Blade diameter
Kerf width
90°
45°
Net weight
Max.255 mm (10") - Min.250 mm (9-7/8")
(685 mm - 835 mm) x (955 mm - 1,155 mm)
USA007-2
5. DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8. DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
11. ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday
resistant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
2
MLT100
15.88 mm (5/8")
255 mm (10")
1.8 mm (1/16")
2.3 mm (3/32")
2.6 mm (3/32")
90.5 mm (3-9/16")
63 mm (2-1/2")
12.7 mm (1/2")
4,300 r/min
(27" - 32-7/8") x (37-1/2" - 45-1/2")
1,130 mm x 984 mm x 333 mm
(44-15/32" x 38-3/4" x 13-1/8")
35 kg (77.2 lbs)
eyeglasses only have impact