User-Maintenance; Thermal Overload Reset; Cleaning And Bag Inspection; Motor Inspection - Powermatic PM2200 Instructions D'utilisation

8.0 User-maintenance

Turn OFF dust collector and
remove plug from
performing any adjustments or maintenance.
Failure to comply may result in serious injury.

8.1 Thermal overload reset

The switch box contains overload protection to help
prevent damage to the motor. The relay will open
the circuit (shut off dust collector) if motor is drawing
excessive current during extended periods of
operation.
If the overload is tripped, allow machine to cool
down for several minutes. Then press breaker reset
button (C, Figure 16) and restart dust collector.

9.0 Optional accessories

Part no. Description
717511 Canister Collection Bag (pkg. of 5)
717531 Drum Collection Bag (pkg. of 5)
power source before

8.2 Cleaning and bag inspection

Empty or replace canister and drum collection bags
when full.

8.3 Motor inspection

Make frequent inspections of motor fan, and blow
out (with low pressure air hose) or vacuum any
accumulation of foreign material to maintain normal
motor ventilation.

8.4 Additional servicing

Any other servicing should be performed by an
authorized service representative.
Table 3
13