Memory Upgrade Module
Your notebook has two memory slots. If you have a module installed in only one slot, you can increase
your memory capacity by installing another memory module in the empty slot or by increasing the size of
the single installed module. In order to optimize the dual-channel design, modules of equal capacity
should be used.
Your notebook supports dual-channel memory, which can have a great effect upon system performance.
In order to support dual-channel memory, two DIMM modules must be installed in your computer.
•
D
O NOT REMOVE ANY SCREWS FROM THE MEMORY UPGRADE MODULE COMPARTMENT EXCEPT THOSE
SPECIFICALLY SHOWN IN THE DIRECTIONS FOR INSTALLING AND REMOVING THE UPGRADE MODULE
•
T
HE MEMORY UPGRADE MODULE CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE
T
O MINIMIZE RISK TO THE MODULE
•
B
EFORE HANDLING A MEMORY MODULE
STATIC ELECTRICITY BUILT UP IN YOUR BODY
•
W
HEN INSTALLING OR REMOVING A MEMORY MODULE
TOUCH ANY CONTACTS OR CHIPS
;
COMPONENTS
THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE COMPONENTS
•
P
OWER DOWN YOUR SYSTEM BEFORE YOU ADD OR REMOVE MEMORY MODULES
SYSTEM IS IN HIBERNATE OR
DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM
•
T
HE INSTALLATION OF INCOMPATIBLE MEMORY MODULES CAN CAUSE NUMEROUS PROBLEMS WHICH
COULD RESULT IN LOSS OF DATA
ADDITIONAL MEMORY FROM THE
67 - Memory Upgrade Module
,
OBSERVE THE FOLLOWING
,
TOUCH A GROUNDED METAL OBJECT TO DISCHARGE
.
. D
O NOT TO TOUCH ANY INTERNAL COMPUTER TERMINALS OR
S
,
LEEP STATES
DATA COULD BE LOST OR THE MEMORY COULD BE
. F
UJITSU HIGHLY RECOMMENDS THAT YOU ONLY PURCHASE
F
-
UJITSU ON
LINE ACCESSORY STORE AT
:
,
HOLD IT BY THE EDGE SO AS NOT TO
. E
.
:
.
WWW
SHOPFUJITSU
.
(ESD).
.
VEN IF THE
.
.
COM