Installation; Installation Requirements; Enodtouch Installation - Scaime eNodTouch-MS Guide Rapide

(1) Power Connector
(2) USB (Type A) Interface
(3) USB (mini-B) Interface
(4) RTC Battery Set Cover
(5) Serial Interface
(6) DIP Switch

Installation

Installation requirements

•
For easier maintenance, operation, and improved ventilation, be sure to install eNodTouch at least 100mm [3.94in.]
away from adjacent structures and other equipment.
•
Be sure that the surrounding air temperature and the ambient humidity are within their designated ranges.
(Surrounding air temperature: 0 to 50°C, Ambient humidity: 10 to 90%RH, Wet bulb temperature: 39°C max.) When
installing eNodTouch on the panel of a cabinet or enclosure, "Surrounding air temperature" indicates both the panel
face and cabinet or enclosure's internal temperature.

eNodTouch installation

eNodTouch-S Panel
Cut-out Adapter
NO
YES
•
Cut a hole in the panel according to the eNodTouch cut-out dimensions.
W H
112.5 77.5
[4.43] [3.05]
105.0 66.0
[4.13] [2.60]
Quick Start Guide SCAIME:
Panel thickness (H)
1.5 [0.06]
To 6.0 [0.24]
1.5 [0.06]
To 6.0 [0.24]
9
NUSG-eNodTouch-MS-FE_196776_D.docx
eNodTouch has two projections on
the top to prevent falling during
installation. Please insert the unit into
the panel at an angle to avoid hitting
the projections.