Led Light; Installing The Shoulder Strap - Panasonic EY6803 Instructions D'utilisation

Masquer les pouces Voir aussi pour EY6803:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

LED Light

CAUTION:
• The built-in LED light is designed
to illuminate the small work area
temporarily.
• Do not use it as a substitute for
a regular flashlight, since it does
not have enough brightness.
the light turns off automatically. The
light illuminates with very low current,
and it does not adversely affect the
performance of the tool during use or
its battery capacity.
This product has the built-in LED light.
This product is classified into "Class 1
LED Product" to EN 6085-1
Class 1 LED Product
Caution : DO NOT STARE INTO BEAM.

Installing the Shoulder Strap

CAUTION:
• Install the shoulder strap firmly to
the main unit of the tool and check
the length of the strap before use.
• Check the condition of the strap
and do not use if it is cut or torn
etc.
There is a risk of injury or damage
if used while improperly installed.
• Please wear the shoulder strap se-
curely on the shoulder.
There is a risk of injury or damage
if it is accidentally dropped.
1. Pass the strap through the strap
holders. (1)
. Pass the strap through the buckles
and adjust the length. (2)
EY6803(EU).indb
6
Depress the trigger
switch, then LED
l i g h t
t u r n s
o n .
When the trigger
switch is released,
- 6 -
Shoulder pad
• The shoulder strap can be adjusted
according to the individual.
• Adjust the shoulder pad to the
shoulder.
• Pull the shoulder strap to make
sure it is firmly attached to the main
unit of the tool.
For Appropriate Use of Battery
Pack
Ni-MH Battery Pack (EY9201)
• Charge the Ni-MH battery fully
before storage in order to ensure a
longer service life.
• The ambient temperature range is
between 0°C (3°F) and 40°C (104°F).
If the battery pack is used when the
battery temperature is below 0°C
(3°F), the tool may fail to function
properly. In that case, charge the
battery until charging is completed for
appropriate functioning of the battery.
• When battery pack is not in use,
keep it away from other metal
objects like: paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals together
may cause sparks, burns or a fire.
• When operating the battery pack,
make sure the work place is well
ventilated.
Battery Pack Life
The rechargeable batteries have a
limited life. If operation time becomes
extremely short after recharging, replace
the battery pack with a new one.
2006/04/10
9:41:31

Publicité

Table des Matières
loading

Table des Matières