Battery Pack; Battery Charger - Panasonic EY6803 Instructions D'utilisation

GUIDELINE TABLE
• Select the torque for fastening screws with the clutch handle.
• Guide for the selection of torque
Depending on the job, adjustments are possible in five levels by approximately 1 Nm
(10 k f-cm) increments.
g
Setting
1

Fastening
Screws 3
4
5
Drilling
Holes (Drill Mark)
(A) For fastening screws into plastic anchor which requires dia. 6.0 mm (1/4") prehole in the concrete.
(B) For directly fastening screws into concrete (like topcon) with dia. 3.5 mm (1/8") prehole.
NOTE: This is only a rough guide. Required torque is different depending on the
shape, material, and application of the screws.
Set according to the work environment of the site.

BATTERY PACK

Model
Battery voltage
Storage battery
Capacity

BATTERY CHARGER

Model
Rating
Weight
Charging time
NOTE:
• Do not charge "Y" type Ni-Cd battery packs.
• For applicable battery packs to this charger, see the label on the charger or the
latest general catalog.
EY6803(EU).indb 10
Torque
Approximately 1.5 Nm (15 k
Approximately .5 Nm (5 k
Approximately 3.4 Nm (35 k
Approximately 4.4 Nm (45 k
Approximately 5.4 Nm (55 k
Approximately 8.3 Nm (85 k
(EY9201 is included with shipment. )
EY9201 EY9200
1 V DC (1. V × 10 cells)
Ni-MH Battery
3.5 Ah 3.0 Ah
See the rating plate on the bottom of the charger.
- 10 -
Guide Depending on Material
Concrete
(A) (B)
f-cm)
g
f-cm)
g
f-cm)
g
f-cm)
g
f-cm)
g
f-cm) Drilling holes in metal
g
EY9106 EY9101
Ni-Cd Battery
.0 Ah 1.7 Ah
EY0110
0.78 kg (1.7 lbs)
55 minutes (EY9201)
Block
(A) (B)
EY9001, EY9006
1. Ah
2006/04/10 9:41:36