TESY GCV 504716D C22 ECW Manuel D'utilisation page 8

Masquer les pouces Voir aussi pour GCV 504716D C22 ECW:
Table des Matières

Publicité

ANTI-CORROSION PROTECTION – MAGNESIUM ANODE
VI.
EN
The magnesium anode provides additional protection to the water tank's
inner surface from corrosion. It is an element undergoing wear and tear
and is subject to periodic replacement, which is at the expense of the
user. In view of the long-term and accident-free use of your water heater,
the manufacturer recommends periodic inspections of the magnesium
anode's condition by a qualified technician and replacement whenever
required, and this could be performed during the appliance's technical
preventive maintenance.
For replacements, please contact the authorized service centres or a
qualified technician!
VII.
OPERATION
This unit has four main operating modes: "Stand by", "Heating" - to
maintain the set temperature, "Smart Control" - continuous self-
learning mode with automatic selection of the heating temperature
regardless of the active operating mode and "Smart Home" - for remote
monitoring and control.
Additional benefits are the signal emitted when buttons are pressed,
the anti-freeze protection of the water heater, the " Anti-Legionella"
function.
1.
Switch on the electric water heater
Before initial start of the appliance, please make sure that the water
heater has been correctly connected to the electrical network and that
it is filled up with water. Switching on the water heater is done through
the device incorporated in the installation, which is described in sub-
item 3.2 of section V, or by inserting the plug into an electrical socket
(for models with cord with a plug).
Description of the control panel of the appliance
2.
1
2
3
The unit's control panel displays information about the operation and
condition of the water heater.
Designation of buttons and elements:
❶ -
Control panel;
❷ -
Indicator of a registered problem;
❸ -
"Stand by" / "ON" button";
❹ -
Wi-Fi module indicator;
❺ -
Operating mode selection button
❻ -
Indicator of set and actual water temperature
3.
Device settings and control
Turning on the electronic control of the device
Press the
button to switch the appliance on. The operating mode set
is displayed on the control panel.
Press the  button again to switch the electronic control off. The Stand
By mode is activated and the unit automatically enters the Anti-freeze
mode. The  button, ⯈ button and the Wi-Fi connection indicator
remain lit on the control panel.
8
Wi-Fi connection indicator
Appliance with a built - in Wi-Fi communication device can connect to a
real-time remote control and monitoring system. Using the Wi-Fi module
indicator, you receive information about the connection activity.
The indicator lights continuously when there is a Wi-Fi connection to the
device and flashes when the connection is lost.
Local control (Indoor)
For devices designed to work with a local connection without the need for
internet connectivity, the indicator
The appliance can be accessed through mobile devices (phone, tablet,
computer). Detailed instructions on the remote operation of the appliance
can be found in the instruction "Instructions for using the built-in wireless
communication module (Wi-Fi)" supplied with your appliance.
Internet control (Outdoor)
6
5
4
For appliances designed to work with Wi-Fi networks and an Internet
connection, the indicator is represented by the symbol
Detailed instructions for operating the appliance over the Internet can
be found in the instruction "Instructions for using the built-in wireless
communication module (Wi-Fi)" supplied with your appliance.
If the Wi-Fi indicator is not available on your control panel, you have a
basic model from this product range. You can control your appliance in
the Manual Control mode through the control panel.
Attention! To exit the "remote monitoring and control" mode
press ⯈.
Manual Control mode
The control in the "Manual control" mode is carried out using the ⯈ button.
The active mode and the current status of the appliance are indicated by a
light on the control panel.
Active mode (set temperature) and temperature display bar:
flashes
.
router
WLAN
WLAN
.

Publicité

Table des Matières
loading

Table des Matières