Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Attach the Adjustable Leg Cover using a Phillips
(+) Screwdriver.
How to Assemble Fridge Door
1. Attach the detached Fridge Door to the Mid
Hinge.
2. Slide the Fridge Hinge (C) into the fixing slot,
and then press it down so that it is aligned with
the hole in the door.
C
3. Inserting the Fixer Lever (B) in the direction of
the arrow, and then flip it down to assemble.
B
4. Assemble the Wire Connector.
12_ setting up
DA68-02918A-05.indb 12
5. Connect the Water Tube [E]. If the model has
red clips, attach them now to the Coupler [F].
Connect the connector [G] on the left door and
the connector [H] on the right door.
G
E
6. Attach the front of the Top Cover, and then
press down on its back until it lies flat. Re-
attach the screws.
• Assemble the Fridge and Freezer doors
CAUTION
• If the Wire Connectors are cross-
• Clips are located inside the cap on the
• To prevent water leaks, if the refrigerator
B
E
Red Clip
(6.35mm)
in the reverse order of disassembly.
assembled, the display will not work
properly.
top.
uses red clips, make sure the red clips
are properly connected to the Coupler
after you insert the Water Tube [E] into
the center of the Coupler.
Center of the
clip A
(6.35 mm)
Indicator Line
H
F
14. 6. 25.
10:57
Publicité
Table des Matières
