Hurst Jaws Of Life EWXT Mode D'emploi page 7

Before switching on/starting up the device and during operation,
make sure that nobody will be endangered by this�
Repairs may only be performed by a trained service technician�
Only genuine HURST accessories and spare parts may be used�
Please note that when working with the equipment, material could
fall down or suddenly break free as a result of shearing, tearing or
breaking�
Observe all intervals for recurring tests and inspections as de-
scribed in the chapter "Maintenance and care"� scribed in the chapter "Maintenance and care"�
The eDRAULIC devices and batteries are not suitable for underwa- The eDRAULIC devices and batteries are not suitable for underwa-
ter use in salt and seawater� ter use in salt and seawater�
Swallowing or inhaling the vapor of hydraulic fluid can be detrimen-
tal to health� Avoid direct skin contact� Please note that handling
hydraulic fluid can negatively affect biological systems.
Moving safety bolts, e�g� for removeable tips, must always be fully
inserted and locked�
When using chain sets, make sure that the chains are attached in a
straight line and that there are no knots in the chain�
When working near live components, high voltage flashovers and
the passage of current to the device are to be avoided�
Prevent the electrostatic charging of the device�
HURST eDRAULIC devices are not explosion-protected! Using
these devices in explosion-protected areas is forbidden�
Please ensure that you do not become entangled in cables and trip
when working with or transporting the device�
Ensure adequate lighting at the location of use and on the way
there�
The battery housing must not be damaged or subjected to mechani-
cal stresses, as this may damage the cells inside�
Avoid deep discharge of the battery�
Prevent conductive materials such as oil or metallic objects from
short-circuiting the terminals�
as de-
en
es
fr
pt
7