7�2 Oscillation/Vibration; Accessories; 8�2 Battery Charger; 8�4 Chain Sets - Hurst Jaws Of Life EWXT Mode D'emploi

7.2 Oscillation/vibration
The total oscillation value / vibration value to which the upper limbs are exposed, is
usually below 2�5 m/s²�
Higher values may be measured for short periods as a result of interaction with the
materials to be processed�
(The oscillations / vibrations were determined in accordance with DIN EN ISO 20643�)

8. ACCESSORIES

8.1 Batteries
Only HURST lithium-ion rechargeable batteries may be used to operate eDRAULIC
devices� Observe the separate operating instructions for the lithium-ion battery!
8.2 Battery charger
Only the "eDRAULIC Power Pack Charger" may be used for the lithium-ion batter-
ies� Observe the separate operating instructions for the charger�
8.3 Power Supply
For eDRAULIC devices, there is a power supply with which the devices can be
connected directly to the power outlet� The power supply transforms the alternating
current into direct current, so it can be used in place of the battery� Observe the
separate operating instructions for the power supply�
8.4 Chain sets
Chain sets and pulling adapters are required in order to perform pulling operations
with the eDRAULIC spreaders and combination tools (see chapter, "Pulling")�
Observe the separate operating instructions for the chains sets�

9. INSTRUCTIONS REGARDING DISPOSAL

Please dispose of all packaging materials and removed items correctly� Electrical
equipment, accessories and packaging should always be disposed of in an envi-
ronmentally compatible way�
Only for EU countries:
Do not dispose of electrical equipment with your household waste!
According to the European Directive 2002/96/EC governing electrical and electron-
ic waste and their application in national legislation, old electrical equipment must
be separately collected and recycled in an environmentally compatible manner�
en
es
fr
pt
15