Kemper PROFILER PowerHead Guide Rapide page 22

22 PROFILER QUICKSTART
SOFTWARE UPDATE VIA RIG MANAGER
To update your PROFILER with the latest software available,
simply connect it to your computer using a standard USB cable as
illustrated below.
Open Rig Manager and make sure that your PROFILER is switched
on. If software updates are available, Rig Manager will ask you for
permission to install them after a couple of minutes. The whole
procedure might take some time, initially. Early versions of the
PROFILER operating system cannot be updated via Rig Manager.
In this case, you need to install the latest using a memory stick,
which is outlined in the following paragraph.
SOFTWARE UPDATE VIA USB MEMORY STICK
» This update method requires you to prepare an empty memory stick, download software, and copy it over to the
memory stick.
» Connect the memory stick to your PROFILER.
» If the memory stick is already formatted, the top row of the display will show "USB Stick". Press the
corresponding soft button, select and execute "Format USB stick". Once completed, you will be notified.
» If the memory stick is not formatted, the PROFILER will show "Are you sure? USB stick needs to be formatted".
Acknowledge the dialog with "Yes" and follow the onscreen instructions.
» Point your browser to: www.kemper-amps.com/start, choose "Updates", proceed to the downloads section
and select the category "Operating System Updates". Download the update and open the archive. Copy the
file "kaos.bin" from the archive to the "OS Updates" folder on your memory stick. Make sure that you read the
enclosed "ReadMe" as well as the Addendum Manual.
MONITOR OUTPUT
LEFT
GROUND
LIFT
CH / PEDAL NETWORK USB
MAIN OUTPUT
RIGHT LEFT
GROUND
LIFT