Safety Instructions; Short Cord Instructions - T-Fal THERMO-SPOT Mode D'emploi

Safety instructions

• Never leave the appliance unattended when in use.
• To prevent the appliance from overheating, do not place it in a corner or against a wall.
• Never leave the appliance plugged in when not in use.
• Do not place the hot plate under water or on a fragile surface.
• If you have any problems, contact the authorized after-sales service center or the internet address
www.t-falusa.com.
• If an extension cord is used, make sure to choose one of equivalent diameter with a grounded
socket.
• Always plug the appliance into a grounded socket.
• Only the appropriate plug-in connector must be used.
• Position the cord carefully, whether an extension is used or not, so that guests can move freely
around the table without tripping over it.
• The plug-in connector must be removed before the appliance is cleaned and the appliance inlet
must be dried before the appliance is used again.

Short Cord instructions

A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk
resulting from becoming entangled in or tripping over a longer cord.
Longer detachable power-supply cords or extension cords are available and may be used if care is
exercised in their use.
If a long detachable power-supply cord or extension cord is used :
1) The marked electrical rating of the cord or extension cord should be at least as great as the elec-
trical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a grounding-type3-wire
cord; and
3) The longer cord should be arranged so that it does not drape over the countertop or table top
where it can be pulled on by children or tripped over unintentionally.
THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLD ONLY.
EN
3