Publicité
Les langues disponibles
Les langues disponibles
User Manual
Introduction
Thank you for purchasing the USB 3.1 Dual M.2 SSD RAID Enclosure. This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
This USB 3.1 Dual M.2 SSD RAID Enclosure allows you to install two M.2 SSDs to create high-
performance storage with configurable RAID.
Package Contents
USB 3.1 Dual M.2 SSD RAID Enclosure
Screws for enclosure and SSD mounting
USB 3.1 Micro-B Male to C Male cable, approx. 40cm
Small screwdriver
This manual
Features
USB 3.1 enclosure for 2 SATA based M.2 SSDs
USB 3.1 Gen 2 standard up to 10 Gbps
Supports RAID 0, RAID 1, Spanning or JBOD
Chipset: ASM1352R
For 30/42/60/80mm SATA based M.2 SSDs
Supports NGFF Key B or Key B + M
Compliant with SATA 3.2
Supports SATA up to 6Gbps
Supports UAS (USB Attached SCSI) Protocol Rev. 1.0
Temperature range: 0 - 70°C (operating), -20 - 70°C (storage)
Installation
Open the enclosure and install the M.2 SSD(s) in accordance with the height of your M.2 SSD (30/42/60
or 80mm).
RAID Configuration:
You can set one of four RAID configurations, including PM, RAID 0, RAID 1 and SPAN mode. Use the
RAID switches and the table below to set your desired RAID configuration.
RAID Mode
PM
Port Multiplier – allows access to both drives individually
RAID 0
Striping – improves system performance
RAID 1
Mirror – creates a redundant drive on the second drive for security
SPAN
Big – creates a large single drive volume, consisting of both drives
Description
English
SW4
1
2
3
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
ON
ON
ON
Publicité
